Home :
Hinges :: Hinges : |
Select Brand
| BLACK & DECKER | CREDA | DRAPER | ECLIPSE | FAITHFULL | HOTPOINT |
| KIRKPATRICK | KNOBS & KNOCKERS | NON-BRANDED | QUALTEX SPARE PARTS | RECORD POWER | SEALEY |
| TALON | TREND | UNBRANDED |
| Trend Hinge Sinking 20Mm Dia X 8Mm Shank | Trend Hinge Sinking 20Mm Dia X 8Mm Shank Image Coming Soon |
Tct hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. For drilling machines. specification:. D=20 mm. Shank diameter=8 |
Trend |
£10.85
|
||
| Trend Hinge Sinking 20mm Dia X 8mm Shank (Tct Drilling Tools / Hinge Sinkers) |  |
TCT hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. For drilling machinesDimensions:Diameter: 20 mmShank Diameter: 8mm |
Trend |
£7.99
|
||
| Trend Hinge Sinking 35Mm Dia | Trend Hinge Sinking 35Mm Dia Image Coming Soon |
This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. Inexpensive hinge sinker is best suited for laminate covered boards. Use at speed range 2000 ð1 |
Trend |
£21.79
|
||
| Trend Hinge Sinking 35mm Dia (Tct Drilling Tools / Machine Bits For Hinge Sinking) |  |
This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. Inexpensive hinge sinker is best suited for laminate covered boards. Use at speed range 2000 -12000RP |
Trend |
£17.48
|
||
| Trend Light Duty Hinge Jig |  |
Trend trade hinge jig with preset apertures for 75mm hinges a light duty hinge jig for routing 75mm hinge recesses in internal doors and linings. * hard wearing template in 12mm laminate. * two part. |
Trend |
£99.99
|
||
| Trend Multi-Bore Hinge Sink Bit 25mm Dia (Tct Drilling Tools / Machine Bits) |  |
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Three flutes and thre |
Trend |
£49.44
|
||
| Trend Multi-Boring Hinge Sink 15mm Dia (Tct Drilling Tools / Machine Bits) |  |
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Dimensions:Diameter: |
Trend |
£75.91
|
||
| Trend Multi-Boring Hinge Sink Bit 20mm (Tct Drilling Tools / Machine Bits) |  |
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Two flutes. two scri |
Trend |
£33.96
|
||
| Trend Router Machine Bit 25Mm Dia Hinge | Trend Router Machine Bit 25Mm Dia Hinge Image Coming Soon |
This specially designed machine bits has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive routing. a template and guide bush fitted to the ro |
Trend |
£55.15
|
||
| Trend Router Machine Bit 25mm Dia Hinge (Tct Drilling Tools / Router Hinge Bits) |  |
This specially designed machine bits has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive routing. a template and guide bush fitted to the rout |
Trend |
£45.44
|
||
| Trend Single Piece Hinge Recessing Jig | Trend Single Piece Hinge Recessing Jig Image Coming Soon |
Trend contractor hinge jig single piece with adjustable apertures the trend hinge jig is a portable template set designed for recessing hinges in wooden doors and frames. It is easy to use with minima |
Trend |
£172.95
|
||
| Trend T420/35 x 8mm TCT Hinge Sinking 35mm Dia |  |
Hinge sinkers for drilling machines. Tct hinge sinking cutter for pillar drills only. designed for recessing holes in melamine covered chipboard to relieve circular hinges. diameter. 35mm. hex shank. 10 |
Trend |
£9.25
|
||
| Trend Template Butt Hinge 75/100mm |  |
A routing template that allows a router to used to rout out a hinge recess on a door and frame. Magnets in template frame to hold the metal templates. Cuts rounded corners which can be removed with a co |
Trend |
£35.43
|
||
| Trend Two Flute 12mm Dia X 19mm Cut C/T (Tct Router Cutter Range / Hinge Recessor) |  |
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving. grooving. rebating and shallow mortising. Use on softwoods. hardwoods. MDF. plywood an |
Trend |
£14.48
|
||
| Trend Two Flute 12mm X 19mm Ex Long C/T (Tct Router Cutter Range / Hinge Recessor) |  |
Features 2mm micrograin Tungsten Carbide tips. for cutting the most abrasive materials to give extra long life. Teflon coated. indicated by distinctive black colouring. Can be used on hardwood & sof |
Trend |
£19.48
|
||
| Veritas Hinge-Boring Jig |  |
Veritas hinge-boring jig drilling. hand-held boring jig drills 35mm holes for cup hinges and outperforms a drill press or expensive machinery in speed and versatility. Precision-cast aluminum alloy fr |
Veritas |
£127.95
|
||
| Washered Fire Hinge Grade 7 Electro Brass 102 x 67mm Pack of 2 |  |
Steel construction. Suitable for 40kg with no door closer fitted. BS EN 1935 Grade 7. |
Eclipse |
£4.69
|
||
| Washered Fire Hinge Grade 7 Polished Stainless Steel 102 x 67mm Pack of 2 |  |
Steel construction. Suitable for 40kg with no door closer fitted. BS EN 1935 Grade 7. |
Eclipse |
£4.69
|
||
| Washered Fire Hinge Grade 7 Satin Stainless Steel 102 x 76mm Pack of 2 |  |
Steel construction. Suitable for 40kg with no door closer fitted. BS EN 1935 Grade 7. |
Eclipse |
£4.69
|
||
| Washered Hinge Polished Brass 102x67mm 1Pr |  |
Pair. Brass construction. PolisheD brass finish. |
Non-Branded |
£4.95
|
||
Previous < 1 2 3 4 5 6 7 8
Page 8 of 8