Home :
Countersink :: Countersink : |
Select Brand
| BOSCH | DORMER | DRAPER | FAITHFULL | FESTOOL | HALLS |
| MARPLES | ROTABROACH | RUKO | TREND | VITREX |
| Vitrex 40 1450 Heavy-Duty Countersink Bit 13mm x 90º |  |
Precision ground high speed steel countersink. cutting head 13mm (1/2) x 90 degrees. Shank diameter 6mm (1/4). ideal for use on wood. mild steel. aluminium and other non-ferrous metals. |
Vitrex |
£7.45
|
||
| Bosch 10-15mm HSS-E Countersink Bit |  |
. . . |
Bosch |
£22.55
|
||
| Bosch 12.4mm HSS Hex Countersink Bit |  |
. . . |
Bosch |
£21.37
|
||
| Erbauer Countersink Set 4 Pieces |  |
4 Piece Set. Precision ground. carbon steel multipurpose set. Drills pilot and clearance holes. countersinks and counter bores in one operation. 1/4" hex shank. |
ERBAUER |
£11.76
|
||
| Trend UNI/CS Countersink |  |
This tct countersink clamps onto any drill between 3mm and 7. 2mm in diameter. The drill passes through the body of the countersink and is secured by two allen bolts which clamp the countersink onto th |
Trend |
£19.59
|
||
| Bosch 12mm HSS Countersink Bit |  |
. . . |
Bosch |
£10.94
|
||
| Bosch 13mm Hex Countersink Bit |  |
. . . |
Bosch |
£4.42
|
||
| Countersink HSS 12mm Round Shaft |  |
12mm. Round shaft. |
Non-Branded |
£5.87
|
||
| Dormer G135 HSS Straight Shank Countersink 60º 10.00mm |  |
Flute geometry - 3 flute. ground all over 60⺠including angle. Application - to produce 60⺠countersinkscan also be used as a de-burring tool. cutter diameter 10mm. |
Dormer |
£40.05
|
||
| Dormer G135 HSS Straight Shank Countersink 60º 16.00mm |  |
Flute geometry - 3 flute. ground all over 60⺠including angle. Application - to produce 60⺠countersinkscan also be used as a de-burring tool. cutter diameter 16mm. |
Dormer |
£67.65
|
||
| Dormer G135 HSS Straight Shank Countersink 60º 8.00mm |  |
Flute geometry - 3 flute. ground all over 60⺠including angle. Application - to produce 60⺠countersinkscan also be used as a de-burring tool. cutter diameter 8mm. |
Dormer |
£34.49
|
||
| Dormer G136 HSS Straight Shank Countersink 90º 10.00mm |  |
Flute geometry - 3 flute. ground all over 90⺠including angle. Application - to produce 90⺠countersinks. also used as a deburring tool. |
Dormer |
£36.35
|
||
| Dormer G136 HSS Straight Shank Countersink 90º 12.40mm |  |
Flute geometry - 3 flute. ground all over 90⺠including angle. Application - to produce 90⺠countersinks. also used as a deburring tool. |
Dormer |
£38.69
|
||
| Dormer G136 HSS Straight Shank Countersink 90º 16.50mm |  |
Flute geometry - 3 flute. ground all over 90⺠including angle. Application - to produce 90⺠countersinks. also used as a deburring tool. |
Dormer |
£48.65
|
||
| Dormer G136 HSS Straight Shank Countersink 90º 25.00mm |  |
Flute geometry - 3 flute. ground all over 90⺠including angle. Application - to produce 90⺠countersinks. also used as a deburring tool. |
Dormer |
£95.49
|
||
| Dormer G136 HSS Straight Shank Countersink 90º 8.00mm |  |
Flute geometry - 3 flute. ground all over 90⺠including angle. Application - to produce 90⺠countersinks. also used as a deburring tool. |
Dormer |
£31.39
|
||
| Draper 13mm Countersink Bit |  |
13mm countersink bit general purpose bit for use on wood or plastics. Suitable for use with hand or power drills. Shank diameter 6mm. Display packed. . |
Draper |
£4.29
|
||
| Draper 13mm Hand Held Countersink Bit |  |
Chemically blacked finish with plastic handle. for use on wood and plastics. . . . |
Draper |
£5.17
|
||
| Draper 13mm Rosehead Countersink Bit (Hss) 8mm Shank |  |
Expert Quality. manufactured from high speed steel hardened and tempered to 55HRC for long life. The 90° head incorporates five cutting edges and an 8mm diameter shank. Suitable for use with h |
Draper |
£8.81
|
||
| Draper 16mm Rosehead Countersink Bit (Hss) 8mm Shank |  |
Expert Quality. manufactured from high speed steel hardened and tempered to 55HRC for long life. The 90° head incorporates five cutting edges and an 8mm diameter shank. Suitable for use with h |
Draper |
£8.92
|
||
| Draper 6mm Countersink Bit |  |
General purpose bit for use on wood or plastics. Suitable for use with hand or power drills. Shank diameter 6mm. . . . |
Draper |
£4.30
|
||
| Drill Bit & Countersink Set 4 Pc |  |
4 Piece Set. Drills clearance hole and countersink in single operation. Ready fitted to a high performance wood drill with centre point. Depth adjustable. |
Non-Branded |
£8.46
|
||
| Faithfull Carbon Countersink 5/8in |  |
Carbon steel rosehead countersink. for countersinking screw holes in wood for the flush fitting of screw heads. Can be used in both hand and power drills. type. rosehead. size. 5/8in - 16mm. shank 1/4in |
Faithfull |
£4.55
|
||
| Faithfull High Speed Steel Countersink 1/2in |  |
High speed steel rosehead countersink. for countersinking screw holes for flush fitting of screw heads in wood. mild steel. plastics and non-ferrous metals. Can be used in both hand tools and power dr |
Faithfull |
£7.85
|
||
| Faithfull High Speed Steel Countersink 1/2in - Chubby |  |
High speed steel rosehead countersink. for countersinking screw holes for flush fitting of screw heads in wood. mild steel. plastics and non-ferrous metals. Can be used in both hand tools and power dr |
Faithfull |
£6.49
|
||
| Faithfull High Speed Steel Countersink 5/8in |  |
High speed steel rosehead countersink. for countersinking screw holes for flush fitting of screw heads in wood. mild steel. plastics and non-ferrous metals. Can be used in both hand tools and power dr |
Faithfull |
£10.95
|
||
| Faithfull Hss Countersink 1/2In |  |
High Speed Steel Rosehead Countersink. for countersinking screw holes for flush fitting of screw heads in wood. mild steel. plastic and non-ferrous metals. Can be used in both hand tools and power dril |
Faithfull |
£8.72
|
||
| Faithfull Hss Countersink 1/2In - Chubby |  |
High Speed Steel Rosehead Countersink. for countersinking screw holes for flush fitting of screw heads. in wood. mild steel. plastics and non-ferrous metals. Can be used in both hand tools and power dr |
Faithfull |
£7.99
|
||
| Festool Bsta Hs D3.5 Ce Drill Countersink With Depth Stop |  |
Diameter - 3. 5mm1 piece in a pack. . . |
Festool |
£42.89
|
||
| Festool Qls D2 8 Ce Deburring Countersink |  |
Diameter - 2 to 8mm1 in a pack. . . |
Festool |
£22.09
|
||
| Forge Steel Countersink |  |
12mm. Tri-lobular shaped handles for extra grip and added comfort. Chrome Vanadium SteelBi-Material Handles6 Milled Blades on Head * Chrome Vanadium Steel * Bi-Material Handles * 6 Milled Blades on He |
FORGE STEEL |
£4.99
|
||
| Halls XCM06 High Speed Steel Countersink 6.3mm - Metal |  |
High speed steel. 1/4in hexagon shank. 3 flute. Countersink. designed for power tool use on metal. size. 6. 3mm. angle. 90âº. |
Halls |
£10.19
|
||
| Halls XCM08 High Speed Steel Countersink 8.3mm - Metal |  |
High speed steel. 1/4in hexagon shank. 3 flute. Countersink. designed for power tool use on metal. size. 8. 3mm. angle. 90âº. |
Halls |
£10.89
|
||
| Halls XCM10 High Speed Steel Countersink 10.4mm - Metal |  |
High speed steel. 1/4in hexagon shank. 3 flute. Countersink. designed for power tool use on metal. size. 10. 4mm. angle. 90âº. |
Halls |
£11.89
|
||
| Halls XCM12 High Speed Steel Countersink 12.4mm - Metal |  |
High speed steel. 1/4in hexagon shank. 3 flute. Countersink. designed for power tool use on metal. size. 12. 4mm. angle. 90âº. |
Halls |
£13.20
|
||
1 2 3 > Next
Page 1 of 3