Home :
Hinges :: Trend Hinges : Trend |
Selected brand : Trend
| BOSCH | CREDA | DIYTOOLS | ECLIPSE | HOMESPARES | HOTPOINT |
| HYGENA | KNOBS & KNOCKERS | QUALTEX SPARE PARTS | SEALEY | TREND | WHIRLPOOL |
| Trend Hinge Jig For Doors And Frames |  |
Use on-site and in joinery shops to increase productivity. It has been designed for ease of use and to minimise setting-up time. |
£214.92
|
|||
| Trend Corner Chisel Hss (Hinge Jig / Hinge Jig Accessories) |  |
Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal (perfect of its kind) for squaring hinge recesses in door frames and door edges. Dimension (size and measurement in length, width and thickness of this product are mentioned as follows) - :length 70mm width 29mmpl. p=74.80% |
£13.95
|
|||
| Trend Hinge Sinking 35mm Dia (Tct Drilling Tools / Machine Bits For Hinge Sinking) |  |
Inexpensive hinge sinker is best suited for laminate covered boards. Use at speed range (scope and variation) 2000 -12000rpm to avoid burning. Use with pillar dri. p=89.31% |
£11.69
|
|||
| Trend Hinge Jig 3mm Stop Kit |  |
A 3 millimeter (mm) spacer pack for use with the hinge jig to allow it to be use d on architrave that is set back by 4 millimeter (mm). Easy (simple) to retro fit to existing hinge jigsand allows for new style architectural designs. Supplied (to your designated address) with fixing screwsplease note (additional information) that. p=82.59% |
£10.26
|
|||
| Trend Hinge Recess 12.7mm Dia (Tct Router Cutter Range / Hinge Recessor) |  |
Ideal (perfect of its kind) for shallow lateral routing cuts such as recessing hinges. Dimension (size and measurement in length, width and thickness of this product are mentioned as follows) - : diameter (width of a cylindrical or circular tool) - : 12. 7mmcutting length: 19mmsha. p=59.26% |
£20.4
|
|||
| Trend Hinge Recess 15.9mm Dia (Tct Router Cutter Range / Hinge Recessor) |  |
Two flute tc cutter giving good chip clearance. Dimension (size and measurement in length, width and thickness of this product are mentioned as follows) - : diameter (width of a cylindrical or circular tool) - : 15. 9mmcutting length: 19mmsha. p=58.43% |
£21.42
|
|||
| Trend Hinge Sinking 25mm Dia (Tct Drilling Tools / Machine Bits For Hinge Sinking) |  |
This machine bit is typically use d by kitchen furniture manufacturers for recessing circular hinges. Use at speed range (scope and variation) 2000 -12000rpm to avoid burning. Use with pillar drill (In our listed range of hand tools, we have drills which are used in making wholes to wood and other materials and do mulitple tasks. These drills come in a range of capacities) s only. p=63.96% |
£33.76
|
|||
| Trend Hinge Sinking 30mm Dia X 8mm Shank (Tct Drilling Tools / Hinge Sinkers) |  |
For drill (In our listed range of hand tools, we have drills which are used in making wholes to wood and other materials and do mulitple tasks. These drills come in a range of capacities) ing machines dimensions : diameter (width of a cylindrical or circular tool) - : 30 millimeter (mm) shank diameter (width of a cylindrical or circular tool) - : 8 millimeter (mm) please note (additional information) that p. Tct hinge sinking cutter for pillar drill (For spare parts and accessories please browse the category section or use the search form) s only. p=40.50% |
£8.57
|
|||
| Trend Two Flute 12mm Dia X 19mm Cut (Tct Router Cutter Range / Hinge Recessor) |  |
Cutter has a narrow neck. Rebating and mortising. |
£23.36
|
|||
| Trend 105/35 x 1/2 TCT Hinge Sinking Machine Bit 35mm |  |
Machine Bit for use in hand portable (easily carried) plunge (immerse) routers. p=77.04% |
£53.35
|
|||
| Trend Butt Hinge Template |  |
A routing template that allows a router to create a hinge recess on a door. |
£40.95
|
|||
| Trend Butt Hinge Template Only 3 Inch |  |
Optional 3 inch template for the butt hinge template. May differ to the website prices. |
£8.28
|
|||
| Trend Butt Hinge Template Only 4 Inch |  |
As those listed in the catalogue are trend list prices excluding vat. Optional 4 inch template for the butt hinge template. |
£8.28
|
|||
| Trend Contractor Hinge Jig 2 Piece With Adjustable Apertures |  |
For easy (simple) handling. p=76.60% |
£239.95
|
|||
| Trend Hinge Jig For Doors And Frames Two Part In Case |  |
A portable (easily carried) two piece template set for easy (simple) handling designed for recessing hinges in wooden doors and frames. It has been designed for ease of use and to minimise setting-up time. Use on-site and in joinery shops to increase productivity. p=92.46% |
£225.72
|
|||
| Trend Hinge Jig Plastic 75mm Two Part |  |
Alight duty hinge jig for routing 75 millimeter (mm) hinge recesses in internal doors linings. Made from a hard wearing 12 millimeter (mm) laminate and the template comes in two parts. p=90.23% |
£91.8
|
|||
| Trend Hinge Jig Plastic Carry Case |  |
Plastic carry case for the HINGE/JIG. p=91.87% |
£14.65
|
|||
| Trend Hinge Jig Plastic Carry Case (Hinge Jig / Hinge Jig Accessories) |  |
If shown below. As those listed in the catalogue are trend list prices excluding vat. |
£17.64
|
|||
| Trend Hinge Jig Two Part Lower Long |  |
Replacement lower template for the HJ/JIG/A. |
£65.45
|
|||
| Trend Hinge Jig Two Part Upper Short |  |
Replacement upper template for the HJ/JIG/A. p=80.50% |
£59.19
|
|||
| Trend Hinge Recess 12.7Mm Dia |  |
Two flute TC cutter giving good chip clearance. p=88.08% |
£19.95
|
|||
| Trend Hinge Recess 19.1Mm Dia |  |
p=89.47% |
£21.55
|
|||
| Trend Hinge Sinking 15Mm Dia |  |
This machine bit is typically use d by kitchen furniture manufacturers for recessing circular hinges. p=77.23% |
£34.59
|
|||
| Trend Hinge Sinking 15mm Dia (Tct Drilling Tools / Machine Bits For Hinge Sinking) |  |
Dimension (size and measurement in length, width and thickness of this product are mentioned as follows) - : diameter (width of a cylindrical or circular tool) - : 15mmoverall length: 60 millimeter (mm) shank diameter (width of a cylindrical or circular tool) - : 1 4 inch. This machine bit is typically use d by kitchen furniture manufacturers for recessing circular hinges. With scribers is use d on veneered and wood finishes. p=68.73% |
£35.39
|
|||
| Trend Hinge Sinking 20Mm Dia |  |
p=81.06% |
£32.99
|
|||
| Trend Hinge Sinking 20Mm Dia X 8Mm Shank |  |
TCT hinge sinking cutter for pillar drill (In our listed range of hand tools, you can select from hammer, press, air, percussion and power drills which suits your requirement) s only. p=44.08% |
£8.39
|
|||
| Trend Hinge Sinking 20mm Dia X 8mm Shank (Tct Drilling Tools / Hinge Sinkers) |  |
Tct hinge sinking cutter for pillar drill (For spare parts and accessories please browse the category section or use the search form) s only. For drill (In our listed range of hand tools, we have drills which are powered by lithium-ion battery and comes with charger) ing machines dimensions : diameter (width of a cylindrical or circular tool) - : 20 millimeter (mm) shank diameter (width of a cylindrical or circular tool) - : 8 millimeter (mm) please note (additional information) that p. p=45.18% |
£8.57
|
|||
| Trend Hinge Sinking 26mm Dia (Tct Drilling Tools / Machine Bits For Hinge Sinking) |  |
Without scribers are for laminate covered boards. Use with pillar drill (In our listed range of hand tools, we have drills which are powered by lithium-ion battery and comes with charger) s only. Di. p=60.73% |
£35.39
|
|||
| Trend Hinge Sinking 35Mm Dia 253364 |  |
|
£31.39
|
|||
| Trend Multi-Bore Hinge Sink Bit 25mm Dia (Tct Drilling Tools / Machine Bits) |  |
Use at recommended speed s of 6000rpm (rounds per minute). Three flutes and three scribers. Specifically for use on. p=85.84% |
£50.49
|
|||
| Trend Multi-Bore Hinge Sink Bit 26mm Dia (Tct Drilling Tools / Machine Bits) |  |
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Three flutes and three scribers. |
£50.49
|
|||
| Trend Multi-Bore Hinge Sink Bit 28mm Dia (Tct Drilling Tools / Machine Bits) |  |
Specifically for use on. Use at recommended speed s of 6000rpm (rounds per minute). p=79.25% |
£99.45
|
|||
| Trend Multi-Bore Hinge Sink Bit 35mm Dia (Tct Drilling Tools / Machine Bits) |  |
The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speed s of 6000rpm (rounds per minute). Specifically for use on. p=88.10% |
£55.59
|
|||
| Trend Multi-Boring Hinge Sink Bit 28mm (Tct Drilling Tools / Machine Bits) |  |
For veneere. The shank has a flat for securing and a grub screw for height adjustment. |
£43.86
|
|||
| Trend Multi-Boring Hinge Sink Bit 30mm (Tct Drilling Tools / Machine Bits) |  |
For veneere. Two scribers and a centre point. |
£36.72
|
|||
1 2 > Next
Page 1 of 2