Tool Direct

Selected brand : Starrett

Starrett 173Mct Feeler Gauge 13 Piece 0.03-0.5mm		Fitting pistons. Checking bearing clearances and gear play.	£35.09
Starrett 272A Radius Gauge 1/32In - 17/64In		The leaves are specially shaped for use in any position at any angle to measure fillets and radii in corners or against shoulders. This set has an external and internal radius on each leaf permitting both concave and convex surfaces to be measured.	£26.68
Starrett 156M Screw Pitch Gauge 0.25-2.50mm		Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends.	£27.79 Sold by 2 Stores
Starrett 159M Screw Pitch Gauge 0.5-11.5mm		p=79.52%	£32.41 Sold by 2 Stores
Starrett 172At Feeler Gauge 9 Piece 0.0015-0.015		Used to adjust tappets. Distributor points. Fitting pistons.	£16.85
Starrett 172Ct Feeler Gauge 8 Piece 0.002-0.015		Checking bearing clearances and gear play. Fitting pistons. Locking device on all sets.	£28.08
Starrett 172Mbt Feeler Gauge 9 Piece 0.04-0.3mm		Spark plugs. Easily removed and replaced. Locking device on all sets.	£21.06
Starrett 172MBT Feeler Gauge 9 Piece Set 0.04-0.3mm		Spark plugs. Checking bearing clearances and gear play. Leaves are tempered steel.	£18.95
Starrett 173MAT Feeler Gauge 13 Piece Set 0.03-0.5mm		Checking bearing clearances and gear play. Rings and pins and gauging narrow slots. Leaves are tempered steel. p=52.43%	£20.55
Starrett 173Ma Feeler Gauge 13 Piece 0.03-0.5mm		Spark plugs. Locking device on all sets. M.	£21.06
Starrett 173MA Feeler Gauge 13 Piece Set 0.03-0.5mm		Checking bearing clearances and gear play. Rings and pins and gauging narrow slots.	£18.95
Starrett 173MCT Feeler Gauge 13 Piece Set 0.03-0.5mm		Feeler gauges are use d to adjust tappets. Rings and pins and gauging narrow slots. There are locking device on all sets. p=75.91%	£31.59
Starrett 237M Depth Gauge 150mm		The gauge consists of a hardened steel head complete with locking nut and an Accurate (exact and precise). Tempered steel rule. p=89.83%	£24.05 Sold by 2 Stores
Starrett 257D Surface Gauge		Full size (dimension details are mentioned as follows) surface gauge. Fully hardened and ground with four gauge pins. Rods or indicator (directing device) stems ranging from 2. p=78.23%	£122.69 Sold by 2 Stores
Starrett 272A Radius Gauge 1/32in - 17/64in		This set has an external and internal radius on each leaf permitting both concave and convex surfaces to be measured. The leaves are specially shaped for use in any position at any angle to measure fillets and radii in corners or against shoulders.	£26.15
Starrett 272B Radius Gauge 9/32In - 33/64In		This set has an external and internal radius on each leaf permitting both concave and convex surfaces to be measured. The leaves are specially shaped for use in any position at any angle to measure fillets and radii in corners or against shoulders.	£37.9
Starrett 272Ma Radius Gauge 0.75-5mm		Starrett 272Ma Radius Gauge 0. 75- 5 millimeter (mm) , 66215 p=82.69%	£42
Starrett 272MA Radius Gauge 0.75-5mm			£37.81
Starrett 66B Feeler Gauge 31 Piece 0.0015-0.035		Rings and pins and gauging narrow slots. Leaves are tempered steel. Easily removed and replaced.	£40.7
Starrett 66B Feeler Gauge 31 Piece Set 0.0015-0.035		Spark plugs. Distributor points. Easily removed and replaced.	£39.89
Starrett 66Ma Feeler Gauge 20 Piece 0.05-1mm		M. Leaves are tempered steel.	£25.2
Starrett C493Me Protractor & Depth Gauge 150mm		Graduation: 1 2 millimeter (mm) 6. Depths are measured from a 150 millimeter (mm) 6 inch blade. p=81.71%	£101.95
Starrett C493ME Protractor & Depth Gauge 150mm		The feature and characteristic details of this product are mentioned as follows - s an angular measurement range (scope and variation) of 0-180 in opposite directions allowing the direct reading of angles and supplementary angles. Depths are measured from a 150 millimeter (mm) 6 inch blade. p=76.51%	£96.85
Starrett S579Gz Telescopic Gauge Set 4 Piece		Constant spring tension provides uniform contact pressure and both plungers are easily locked at any desired setting. Handles are rigidly attached to the contact plungers and are automatically self-centering.	£90