Tool Direct

Home : Gauges :: Sealey

Gauges : Sealey

Selected brand : Sealey


Sealey Tyre Pressure Gauge Digital with Leader Hose & Quick Release Single lithium battery will run approximately 4000 test cycles. Flexible leader hose with.

Sealey 1/2&quot Square Drive Angular Torque Gauge For Torque Wrenches Allows operator to accurately tighten fixing to manufacturer 8217;s exact the specification details of this product are mentioned as follows -. Essential measuring tool for the busy workshop. p=83.33%

Sealey Tyre Pressure Gauge Digital with Swivel Head & Quick Release Lcd display calibrated in psi. Auto-off function with low battery indication. Swivel head Rigid (hard) type w. p=93.15%

Sealey Airline Gauge Long Type Linear pressure scale. 350mm rubber hose with steel protection sleeve. 5bar(0-140psi)air supply minimum: 6.

Sealey Airline Jumbo Clip-On Gauge 0-100psi / 0 - 6.9bar Range (scope and variation) : 0-6. 9bar(100psi)inlet: 1 4 quotbsp male. p=80.00%

Sealey Dial Gauge Indicator 10mm Travel Metric Precision mechanism with 55 millimeter (mm) dial and locking. Type: metricdeflection travel: 10mmgraduation: 0. 01mm shank size (dimension details are mentioned as follows) : 8 millimeter (mm). p=74.92%

Sealey Digital Tyre Inflator Gauge Robust composite body with backlit lcd digital display. Psi. Kilogram (kg) cm and kpa. p=92.12%

Sealey Digital Tyre Pressure & Depth Gauge Robust. Rubber grips fit comfortably in the hand.

Sealey Feeler Gauge 15 Blade Metric Dual Marked 06 0. 35 0. 45 0.

Sealey Feeler Gauge 36 Blade Combo Steel/Brass Dual Marked Feeler gauge. Dual (double) marked in imperial and metric. p=89.91%

Sold by 2 Stores

Sealey Hydraulic Press 10ton Bench Type without Gauge Supplied (to your designated address) without gauge. Standard (established by authority) hydraulic range (scope and variation) 10tonne bench press detachable pump and ram allowing hydraulics to be use d for other purposes when press is not in use. p=79.81%

Sealey MIG Gas Regulator Disposable Cylinder 1 Gauge Industrial regulators fit co2. Appropriate for mini refillable disposable size (dimension details are mentioned as follows) gas cylinders. Maximum operating pressure o. p=79.19%

Sealey Tyre Pressure Gauge Twin Push-On Connector Professional Manufactured (made) to en 837-1 6 and supplied (to your designated address) with twin (double) connector and extended handle. Robust alloy construction with accuracy of 1. p=83.50%

Sealey Tyre Pressure Gauge with Tyre Tread Depth Gauge Flexi Hose Robust gauge with protective rubber bumper reading up to 8bar (120psi). Integral colour coded measurement tyre depth gauge.

Sealey Airline Gauge EC psi/bar Scale Composite body and dial type gauge with rubber protector. Fitted with 500 millimeter (mm) rubber hose and single clip-on connector. Range (scope and variation) : 0-10bar(0-145psi)air supply maximum: 12bar(175psi)inlet: 1 4 quotbsp male. p=91.08%

Sealey Airline Gauge Long Type to CE Regulations Extruded aluminium body with large rubber bumper. With parallax correction.

Sealey Airline Jumbo Gauge 0 - 160psi Fitted with 400mm rubber hose and single push-on connector. Calibrated in bar and psi.

Sealey Air Filter/Regulator with Gauge Heavy-Duty Appropriate for most workshop air supply set-ups. Regulator assembly the feature and characteristic details of this product are mentioned as follows - locking control knob for pre-setting air pressure and large. Easy (simple) -to-read pressure gauge. p=76.44%

Sealey Brake Drum Wear Gauge Measures drum wear to ensure within manufacturer 8217;s tolerance. Knurled locking action.

Sealey Camber Castor Kingpin Gauge Measures wheel geometry by attaching calibrated bubble levels to the wheel studs. For Accurate (exact and precise) results these tools should be use d with steering turntables (ga44). Supplied (to your designated address) in a ste. p=87.20%

Sealey Cylinder Leakage Tester 2-Gauge Designed to detect a variety of common engine faults including: worn piston rings. Cylinder head cracks and blown head gaskets. 12.

Sealey Digital Height Gauge 0-300mm/0-12&quot Include s fine adjustment control carriage for Accurate (exact and precise) use. Six digit lcd read-out displays in metric or imperial. Tolerance function enables fast ch. p=91.39%

Sealey Digital Tyre Tread Depth Gauge Tough composite sliding gauge. 10 millimeter (mm) high figures in lcd display for ease of reading. p=90.32%

Sold by 2 Stores

Sealey Digital Tyre Tread Depth Gauge - Vosa Approved Calibrated and vosa approved for use when mot testing all classes of vehicle. Metric and imperial calibration with conversion between the two.

Sold by 2 Stores

Sealey Feeler Gauge 26 Blade Offset Dual Marked 45 - 25 millimeter (mm) offset tips are essential for checking tolerances on ohc configurations and appropriate for other applications where straight blades cannot reach. Dual (double) marked in imperial and metric. p=89.49%

Sealey Feeler Gauge 35 Blade Dual Marked Blade size (dimension details are mentioned as follows) s : 0. 005 " 0. 009 " 0. p=57.14%

Sealey Magnetic Camber Gauge Graduated from 6 to -6. Large adjuster knob for convenient zeroing of bubble during castor angle measurement.

Sealey MIG Gas Regulator 1 Gauge Industrial Appropriate for industrial size (dimension details are mentioned as follows) gas cylinders. Using adaptors where applicable. p=71.09%

Sealey MIG Gas Regulator Kit No Gauge Regulator Industrial Convert the small-bore hosing (normally 4 millimeter (mm) od) found on portable (easily carried) migs for use with industrial size (dimension details are mentioned as follows) gas regulators and cylinders. Order just the bull nose adaptor (120 432102) and hose (ak9) or a complete kit including p=85.57%

Sealey Optical Wheel Alignment Gauge Works on practically all cars and light commercial vehicles with rim diameter (width of a cylindrical or circular tool) - s between 200 and 600mm. Measures toe-in and toe-out by contact with wheel rims and optical sight alignment markers. p=89.55%

Sealey Trammel Gauge Telescopic Aluminium measuring device constructed in four sections. Appropriate for obtaining precise (exact) dimensional data for chassis alignment purposes. Mid probe read-out obtained by markings. p=92.72%

Sold by 2 Stores

Sealey Tyre Inflator Gauge Die-cast body and dial type gauge with rubber protector. Range (scope and variation) : 0-12bar(0-175psi)air inlet: 1 4 quotbsp. p=89.66%

Sealey Tyre Pressure Gauge Deluxe Twin Push-On Connector Precision engineered and fitted with large filter to protect operating mechanism for hard usage over long periods. Scale: 0-11bar(0-160psi).

Sealey Tyre Pressure Gauge Dial Type GS/TUV Approved Accurate (exact and precise) to 1. 5psi. Scale: 0-3bar 0-40psi. p=77.78%

Sealey Tyre Pressure Gauge GS/TUV Approved Metal body. Fitted with 45 angle chuck.

  1   2   >  Next  

Page 1 of 2

Browse Categories

  • Home

  • Advanced Search